vwbus.no

Guys,
Need help. Temperature needle won´t budge from it´s normal position.
Where do I locate the switch or the sensor? How difficult is the job?
I tried to find answer in previous threads but couldn´t find it.
VW BUSS. 2.1L. 1987.
Thanks.
Xavi

you find it on the thermostate house on the side pointing forward.

easy to change, rize the left back of the car. Have the new one in stand by, pull out the sprint on the sensor and pull it out and replace it with the new one. Refill with water and empety the system from air.

Thank you mate for the diagram and a quick reply.
I appreciate it. I will try to change it coming week.
I will drop a word about how it goes?
Thanks
Xavi

before you change the sensor/sender check it with a ohm meter, if it doesent indicate a brake than are the sender proberly ok, you can check from the connections on the digijet box,
download this and read

https://docs.google.com/open?id=0B0UCQ0 ... MwMDE5NTY4

I have changed the sensor located on the thermostat house but still no reaction.
The temperature needle won´t move. Is there a second sensor?
What is the next step?

If you connect the cable to earth then should the sensor indicate max temp if not then.it's a trouble with the cable from the.sensor to.the.instrument

Sent from my C6903 using Tapatalk

on some of mine cars, trouble with instrumens have accured at the multipin thing on the back of the instrument cluster. remove it, clean it and try again

Thanks for the tips Guys. I will try out tomorrow in day light.

Pardon my ignorance. May you please expand on which cable to connect to the earth.